Funding Wizard

The Department of Energy’s (DOE’S) Office of Fossil Energy and Carbon Management (FECM) and National Energy Technology Laboratory (NETL) are focused on developing advancements in new materials needed to operate in extreme environments. FECM has previously supported the development of hydrogen turbines for coal gasification systems with pre-combustion carbon capture. This approach, with a water gas shift, produces a pure hydrogen fuel for the gas turbine and was also considered for fuel cell applications. More recently, the focus has been on high hydrogen content-fueled (70%-100% hydrogen) turbines. In this application, combustion characteristics pose a challenge. Hydrogen is a fast-burning fuel with high flame speeds, causing issues with most modern dry low-nitrogen oxide (NOx) combustors on industrial gas turbines. Previous DOE-funded research investigated issues related to hydrogen use in turbines and its effects on combustion, materials, and aerothermal heat transfer. Significant progress was made in resolving the understanding of auto-ignition, flashback, thermo-acoustics, mixing requirements and other combustion-related phenomena.A significant amount of work remains before a full commercial offering of 100% hydrogen-fueled turbines. After the hydrogen concentration exceeds 75%, there is a significant change in combustion behavior that will require new combustor designs, sensor locations, and control schemes to detect the flame and monitor for flashback and thermoacoustic instabilities. NOx emissions may become an issue at higher hydrogen concentrations due to increased flame temperature and limitations of current pre-mixed dilution technologies. Standard catalytic NOx reduction technologies with some modifications could still be a viable approach. The higher flame temperatures and increased water content could also affect the lifetime of metal hot gas path parts and ceramic recession, thereby increasing the need for new materials and coating and improved cooling schemes.This FOA focuses on development of these hot gas path parts, and specifically the advancement of ceramic matrix composite (CMC) materials to increase the temperature range of the hot gas

Replacing your old and inefficient air conditioner units can save more money than you think

Incentives are available for the installation of new high-efficiency air conditioner (AC) units replacing your existing and operating air conditioner units. As your AC unit approaches or reaches its useful life expectancy of 15 years, replacing it with a new high efficient AC unit can save 40-60% on electricity compared to the existing unit.

 
If you are ready to replace your old unit with a new high efficiency air conditioner unit, please download the following information and contact us about your project. (All Projects are subject to funding availability)

Program Steps
 

• Download the Program Guidelines and Air Conditioner Incentive Table documents.
• Download the Air Conditioner Application: (Re-name file using account address and Name)
• Please download and complete all required forms (including the tax forms - W-9 & 590)
• Questions about the program details simply fill out our online form. A representative will contact you within 2-3 business days.

The California Department of Food and Agriculture's (CDFA) Alternative Manure Management Program (AMMP) awards competitive grants to California dairy and livestock operations for technologies and specific management practices that result in long-term methane emission reductions and maximize environmental benefits. 

Financial incentives to implement non-digester practices to reduce or avoid methane emissions, including solid separation, conversion from flush to scrape manure collection and enhanced pasture-based management practices.

The primary goal of American Rescue Plan Technical Assistance Investment Program is to ensure improved understanding of and equitable participation in the full range of USDA programs and services among underserved farmers, ranchers, forest land owners and operators through supporting the organizational delivery of technical assistance projects and establishment of technical assistance networks. USDA is authorized to support and facilitate the establishment of technical assistance projects toward this goal. Projects must provide a range of technical assistance services to underserved agricultural producers. The term “agricultural producer” is used to refer to agricultural farmers, ranchers, and private forest land owners and operators.

Beginning farmer education for adult and young audiences in the United States can generally be traced back to the advent of the 1862 and 1890 Morrill Land-Grant Acts. But, for the first time, the Food, Conservation, and Energy Act of 2008 (Pub .L. No. 110-234, Section 7410) appropriated $75 million for FY 2009 to FY 2012 to develop and offer education, training, outreach and mentoring programs to enhance the sustainability of the next generation of farmers. The Agriculture Act of 2014 provided an additional $20 million per year for 2014 through 2018. The reasons for the renewed interest in beginning farmer and rancher programs are as follows: the rising average age of U.S. farmers; the 8% projected decrease in the number of farmers and ranchers between 2008 and 2018; and the growing recognition that new programs are needed to address the needs of the next generation of beginning farmers and ranchers. The Agriculture Improvement Act of 2018 (aka the 2018 Farm Bill) reauthorized the Beginning Farmer and Rancher Development Program and provides mandatory funds for which supports education, mentoring, and technical assistance initiatives for beginning farmers and ranchers.

This Request for Information (RFI) is being issued by the US Department of Energy’s (DOE) Building Energy Codes Program, on behalf of the Office of Energy and Renewable Energy (EERE) Building Technologies Office (BTO). The intent of this RFI is to obtain public input regarding the solicitation process and structure of a potential DOE Funding Opportunity Announcement (FOA) to fund sustained cost-effective implementation of building energy codes, in accordance with the Infrastructure Investment and Jobs Act. This will be referred to throughout the document as the Resilient and Efficient Codes Implementation (RECI) FOA. Specifically, this RFI seeks input on: • Energy Code Implementation Criteria and Requirements for Key Topic Areas • Advanced Energy Codes and Building Resilience • Methods to Support Sustained State Energy and Building Resilience Code Implementation • Funding, Partnerships, Eligible Entities, and Evaluation Criteria • Energy and Environmental Justice (EEJ) Priorities Information collected from this RFI will be used by DOE for planning purposes to develop a potential FOA. The information collected will not be published.

The U.S. Department of Energy’s (DOE) Hydrogen and Fuel Cell Technologies Office (HFTO) seeks input on priority areas that will advance domestic manufacturing and recycling of clean hydrogen technologies, including fuel cells, storage equipment, and other hydrogen related components as specified below; and on priority areas that will advance electrolyzer technologies for affordable clean hydrogen production, in alignment with the Bipartisan Infrastructure Law (BIL) and the mission of DOE’s Hydrogen Energy Earthshot to reach the goal of $1 per 1 kilogram in 1 decade (“1 1 1”). This Request for Information(RFI) was developed in coordination with the Advanced Manufacturing Office. This RFI is issued to obtain feedback on the status of and opportunities for technologies that support goals in BIL section 40314, amending the Energy Policy Act of 2005 (EPACT). The BIL added a new section 815 on clean hydrogen manufacturing and recycling research, development, and demonstration (RD&D) and a new section 816 for the establishment of the Clean Hydrogen Electrolysis Program to EPACT. The EPACT Sec. 815 activities are grouped into a Clean Hydrogen Manufacturing Initiative (815a) focused on enhancing domestic manufacturing of clean hydrogen use, storage, and related equipment and a Clean Hydrogen Technology Recycling RD&D Program (815b) that covers recycling of equipment for clean hydrogen processing, delivery, storage, and use, including fuel cells. The Clean Hydrogen Electrolysis Program in section 816 expands on DOE’s existing, comprehensive Program on electrolysis and is a research, development, demonstration, commercialization, and deployment program aimed at improving efficiency, increasing durability, and reducing capital costs of electrolyzers, thus facilitating the commercialization of clean hydrogen electrolyzer technology. DOE does not intend to publish information collected through this RFI; input will be used to develop and refine the programs. The full text of this RFI is available on EERE Exchange (https://eere-exchange.energy.gov). Responses to this RFI must be submitted electronically to H2RFI@ee.doe.gov no later than 5:00 p.m. (ET) on March 29th, 2022. If possible, please copy and paste the RFI questions and use them as a template for your response. Responses must be provided as attachments to an email. It is recommended that attachments with file sizes exceeding 25 MB be compressed (i.e., zipped) to ensure message delivery. Responses must be provided as a Microsoft Word (*.docx) or Adobe Acrobat (*.pdf) attachment to the email. Only electronic responses will be accepted. DOE will not respond to individual submissions or publicly publish a compendium of responses. A response to this RFI will not be viewed as a binding commitment to develop or pursue the project or ideas discussed. Respondents are requested to provide the following information at the start of their response to this RFI: • Company/institution name • Company/institution contact • Contact's address, phone number, and e-mail address.

CAL FIRE’s Forest Health Program funds active restoration and reforestation activities aimed at providing for more resilient and sustained forests to ensure future existence of forests in California while also mitigating climate change, protecting communities from fire risk, strengthening rural economies and improving California’s water & air.

Through grants to regionally-based partners and collaboratives, CAL FIRE seeks to significantly increase fuels management, fire reintroduction, treatment of degraded areas, and conservation of forests.

Project activities funded by CAL FIRE's Forest Health Grant Program may include:

• Forest fuels reduction
• Prescribed fire
• Pest management
• Reforestation
• Biomass utilization
• Conservation easements and/or land acquisition through the Forest Legacy Program
• Research through the Forest Research Program

Challenges and Opportunities for Building-Integrated Photovoltaics The U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Solar Energy Technologies Office (SETO) and Building Technologies Office (BTO) are requesting information on technical and commercial challenges and opportunities for building-integrated photovoltaic systems. This RFI is intended to identify and quantify remaining barriers and explore key opportunities to inform future strategy program development in this area.

Community Air Protection funds allow for immediate actions to improve the air quality of the most impacted communities across the state, while the other aspects of AB 617 are developed and implemented. Partnering with communities is essential to the success of these incentives, and both the California Air Resources Board (CARB) and air districts are looking to local community members and groups to help identify funding priorities